M/YÂ NOMAD
SUMMARY
OVERVIEW
1970 Chris Craft Commander 55 Hull Number 9
3 Staterooms 2 Heads
Solid Fiberglass Construction
Detroit 8V-71N main engines with Onan (Cummins) 20KW generator
RECENT UPGRADES & REPAIRS
Hauled out for professional bottom job in Dec 2018
Hull and running gear were soda blasted, scraped, and painted with 2 coats of Seahawk Cukote semi-ablative bottom paint in teal (Dec 2018)
Both rudders removed and repacked (Dec 2018)
Original 26x30 3 blade wheels were removed, inspected, tuned, polished, and reinstalled (Dec 2018)
Maxwell windlass, 250' 1/2" chain, 150' 3/4" 3 strand rode, Mantus heavy duty anchor swivel, and Manson Boss 100lb anchor (all 2019)
Main engines removed from boat for total rebuild (2006)
(3) New aluminum fuel tanks, supply/return manifolds, and fuel hoses (2006)
4 new 8D house batteries (2017)
Highfield CL360 (11'6") Aluminum/Hypalon RIB with Suzuki 20hp fuel injected electric start outboard - less than 200 hours (2016)
All new Sunbrella for bimini, flybridge covers, bow settee cover, and custom paddleboard and kayak covers (2018)
BIC ACE Wave commercial duty stand up paddleboard (2017)
Perception Tribe 9.5 sit on top kayak (2016)
Hawkeye Depth Sounder and transducer (2019)
Marinco dual trumpet air horn (2019)
ACR Artex EPIRB (2019)
Parker Viega PEX manifold and new PEX domestic water supply lines (50% completed)
Ronco 55 gallon poly holding tank with non-contact tank level sensor and remote display, Dometic SeaLand "T" macerator pump, custom transom mount pump out port, and Raritan SaniFlex plumbing (2018)
Raritan Elegance fresh water flush electric macerating toilet with SmartFlush remote mounted controls for both heads (Master head installed, Guest head on board with all parts to install) - (2018)
Blue Sea Systems 12v sub panel installed in salon to power electric toilets and macerator plus spare circuits (2018)
New SureFlo fresh water pump installed, old pump and rebuild kit onboard for spare (2018)
Maytag 6 cu ft chest freezer (2018)
GE full size front load washer/dryer (2018)
Primary bilge pump switch replaced with ISS Ultra pump switch (2018)
LG 55" 4K Smart TV (2017)
Hanging glassware rack with full set of stainless steel wine and martini glasses (2018)
Dec 2018 Haulout
Prepping for paint
2 coats Seahawk Cukote high copper semi-ablative biocidal paint
KNOWN ISSUES
The flybridge is not original, and was not installed to the same high Chris Craft standards. In the future it will need to be repaired or removed
The aft enclosure is also not original and also was not constructed to Chris Craft standards. It needs to be removed or rebuilt
There is some deterioration on the edges of the hard top that need to be addressed
The deck paint is peeling in places and needs to be addressed.
The windlass stopped working recently. The motor windings test fine but will not rotate - it's believed to be a basic battery or wiring issue as the windlass is less than 1 year old and functioned flawlessly previously including the 2000nm cruise. There is a spare control box onboard along with wiring diagram . Manual operation with oem lever handle works perfectly